Wireless chargers have revolutionized the way we charge our devices. Gone are the lengthy and cumbersome USB cables and enters the seamless stress-free way to ensure your device continues to perform as expected. But wireless chargers are not without their issues as more and more iPhone X and iPhone 8 users report wireless chargers that are not working correctly. If you are reading this article, you must be looking for a way to fix the wireless charger not working on iPhone 11/X/8 and get it working again. Keep reading for the most effective solutions.
If you are certain that you have placed the iPhone correctly on the wireless charger and the device still won’t charge, you should try the following solutions:
The first thing you should do is check whether the entire charging kit is working properly. Check the kit’s elements such as the power source and the adapter for any visible defects.
You can try connecting the charger to another wall outlet and you can also check if the kit is compatible with the iPhone.
Some iPhone cases can interfere with wireless charging especially if they are thick. It is therefore a good idea to remove the iPhone case before trying to charge the device again.
Another simple solution to the wireless charger not working on iPhone issue is to restart the iPhone. The restart effectively eliminates any software glitches that could be interfering with the device’s proper function. Here’s how to restart your device:
Step 1: For the iPhone 8 press and hold the power button until you see “Slide to Power Off” on the screen. For iPhone X, hold down one of the volume buttons and the side button.
Step 2: Slide to Power off the device and then press the power (side) button to restart the device.
If a simple restart doesn’t work, you can try a hard reset. A hard reset has been known to temporarily fix the wireless charger not working on iPhone 11/X/8 issue. Here’s how to do it:
For the iPhone 8 or 8 plus, press and hold the volume button and the power button until you see the Apple logo on the screen.
For the iPhone X, press and quickly release the volume up button, quickly press and release the volume down button and then hold down the Side button until the Apple Logo appears on the screen.
The wireless charger not working on iPhone problem could easily be that the charging pad is not plugged in. So, before you go any further, check that the charging pad is plugged into a power source.
Your iPhone will only work with a charger that is Qi-enabled. Therefore if everything you try doesn’t work, you may want to check is the charger is Qi-enabled. If not, try using charger that is Qi-enabled charger.
Wireless charging was introduced as part of an iOS firmware update. Therefore it is likely that the iPhone is not charging because your device is not updated. To update your iPhone, follow these simple steps:
Step 1: Go to Settings > General > Software Update to check if a software update is available.
Step 2: If an update is available, tap “Download and Install” and wait for the device to install the update.
Step 3: If the device is up to date, you will see a message saying “Your iPhone is Up to Date” along with a software number. In this case, try one of the other solutions.
It is important that you place your devicet to the correct position on the charging pad. Ensure that the device is at the pad’s center and that it is facing up.
If all the solutions above don’t work, it may be time to consider that the iPhone’s software may be faulty in some way and therefore unable to charge wirelessly. In this case, third-party iOS system recovery software can help you fix the wireless charger not working on iPhone issue and get the device charging again.
The best third-party tool to use in this case is FoneGeek iOS System Recovery (iOS 13 Supported). It is easy to use and highly effective and can fix the issue without causing data loss. Aside from this issue, iOS System Recovery can also be used to fix a number of other iOS issues and iTunes errors.
To use iOS System Recovery to fix this problem, follow these simple steps:
Step 1: Download and install the program on to your computer and then launch it. Click on “Repair Operating System” and then connect the iPhone to the computer using USB cables.
Step 2: Follow the on-screen instructions to put the device in DFU/recovery mode to allow the program to detect the device. Once the device is detected, iOS System Recovery will provide the most suitable firmware for the device. Click “Download” to begin downloading the firmware.
Step 3: In a few minutes the device will restart. You can then try charging the device to see if the problem has been fixed.
If you are certain that you need to replace the charger for it to work correctly, the following are some of the best Qi Wireless chargers to choose from:
This is a small charging pad with non-slip coating on its discs. It small enough to fit on your nightstand and has proven effective in numerous tests.
If you want the best performance and very fast charging, use the 9W as opposed to the 5W.
This is the best charger to choose if you intend to keep using your device while charging. It comes with a suction base and can be mounted on a table. It has an adjustable head to allow it to turn in any direction and a magnetic plate that holds the iPhone firmly during charging.
If your wireless charger is not working on iPhone 11/X/8, it is our hope that one of the above solutions have been of help to you. Keep in mind that just as this problem is likely a hardware issue, it could also be a software issue.
By Fay J. Melton
Posted on Aug 08, 2019, 21:58:38
Fay Melton has explored the area of technology and software for more than 5 years and he is enthusiastic about helping users solve various technology issues.
Fay J. Melton
Last updated: Wednesday on May 27, 2020, 14:45:04
iOS 13